美国布康机械发展有限公司

FAB-CON DIGITAL S-SERIES

PATENTED COMPRESSIVE SHRINKAGE TECHNOLOGY FOR OPEN WIDTH KNIT FABRICS. ADJUSTABLE COMPACTION ON ALL KNIT FABRICS. SYSTEM INCLUDES:
SMALL DIAMETER METAL FEED ROLL AND RUBBER COVERED RETARD ROLL.
UPPER SHOE AND SLIP-SHEET.
INTEGRATED TENTER ENTRY SYSTEM FOR IMPROVED FABRIC CONTROL.
OPERATING SPEEDS UP TO 45 METERS PER MINUTE.
OPERATOR FRIENDLY WITH MINIMAL ADJUSTMENTS AND NO DIFFICULT SETTINGS.
SYSTEM ALLOWS THE OPERATOR TO TARGET SPECIFIC WEIGHTS AND STITCHES PER INCH RESULTING IN MORE CONSISTENT RESULTS.
RESULTS INCLUDE EXCELLENT FABRIC FEEL AND HAND.
PATENTED COMPRESSION STATION PROVIDES EVEN COMPACTION ACROSS THE WIDTH OF THE FABRIC.
RESULT IS FABRIC WITH EVEN WEIGHT AND COURSE COUNTS AND WITHOUT FLOPPY EDGES THAT APPEAR DURING LAY-UP AND CUTTING.
TWO SIMPLE ADJUSTMENTS ALLOW THE SIZE OF THE CAVITY TO BE INCREASED OR DECREASED.
THESE TWO ADJUSTMENTS ALLOW THE PROCESSING OF MOST KNIT STYLES.
THIS PROVIDES THE OPERATOR THE ABILITY TO CHANGE FROM ONE STYLE TO ANOTHER WITHIN MINUTES.

FAB-CON S-SERIES ADVANTAGES VERSUS OPEN WIDTH FELT COMPACTORSES

VERSION OF A SANFORIZER THAT WAS DEVELOPED OVER 60 YEARS AGO FOR USE ON WOVEN FABRICS.
ORIGINAL DESIGNS USED RUBBER BELTS AND STILL DO AT PRESENT.
CURRENT MACHINES FOR KNIT FABRICS USE FELT BELTS.
Shortcomings：
The weaknesses of the felt system create many problems for the user. These machines can only operate at speeds up to 20 meters per minute and can only
compact up to 10% in the lengthwise direction. These systems do not make it possible to adjust the level of compaction from style to style in order to
target specific fabric standards.
The felt systems are simply good calendaring machines but cannot be seriously considered as compressive shrinkage machines used to control knitted fabric
weight and residual shrinkage.

ADVANTAGES OVER OPEN WIDTH FELT BELT MACHINES

PRODUCTIVITY：
OPEN WIDTH FELT BELT MACHINES - 15 - 20 METERS PER MINUTE.
FAB-CON S-SERIES STABLESIZER - 35 - 45 METERS PER MINUTE.

UNIQUE ROLL HEATING SYSTEM ：
ROLLS USE RE-CIRCULATING THERMAL OIL.
ROLL TEMPERATURES CAN BE ADJUSTED AND CONTROLLED RESULTING IN HIGHER QUALITY FABRIC RESULTS WITH NO TOP
TO BOTTOM FABRIC SHINE.

VARIABLE AND ADJUSTABLE COMPACTION：
OPEN WIDTH FELT BELT MACHINES – MAXIMUM OF 10% COMPACTION WITH ADJUSTMENTS OF +/- 2 %.
FAB-CON S-SERIES STABLESIZER – 0 – 25% COMPACTION AND IS FULLY ADJUSTABLE TO TARGET SPECIFIC FABRIC
SHRINKAGE AND FABRIC GSM GOALS.

FAB-CON ADJUSTABLE COMPACTION